Ammonium Molybdate

Ratings: (No Reviews)

Total Ratings: 0
Avg. Ratings: 0.0 out of 5

AA0285-25GR AA0285-100GR
470300-222EA 26.45 USD
470300-222 470300-220
Ammonium Molybdate
Chemicals for Science Education
CAS Number: 12054-85-2
Formula Weight: 1235.86
Formula: (NH4)6Mo7O24·4H2O
Hazard Info: Irritant
Density (g/mL): 2.276
Boiling Point (°C): Decomposes
Freezing Point (°C): Decomposes
Synonyms: Ammonium Heptamolybdate Tetrahydrate
Shelf Life (months): 36
Storage: Green

Note: The chemical specifications for some items on this product page may differ from the specifications listed above. For more information, consult the Safety Data Sheet or contact your Ward's representative.

Delivery information: This product is designed for educational and teaching laboratories, and no certificate of analysis is available.



   
 

ORDER

Disposal

This disposal method is published for your convenience. You MUST have checked with your federal, state, and local regulations before using this method and these methods are only applicable for small laboratory sized quantities.

Use a lab apron, chemical resistant gloves and goggles before following the below method to dispose of hazardous waste.

 1. Dissolve the substance in the smallest amount of water possible in a beaker placed in a fume hood.
 2. Neutralize the solution to a pH of about 7 with either dilute hydrochloric acid or dilute sodium hydroxide if necessary.
 3. Stir the solution and add an excess of 1 M calcium chloride to the neutral solution. A precipitate will form.
 4. Decant the liquid and flush it down the drain with at least a 20-fold excess of water.
 5. Once the solid has dried, place it in a container and it should be disposed of in a landfill.

Solution Prep

To prepare a solution, determine the formula weight of the material, the concentration (Molarity) of the solution, and the amount of solution desired in Liters. Once this information has been obtained, use the following formula:
(Formula Weight) x (Concentration) x (Desired Volume) = Number of grams in desired volume of liquid

For a 1 M, 1 L solution:
(Formula Weight) x (1 mol/L) x (1 L) = x g added to 1-L volumetric flask. Dilute to a final volume of 1 L with DI Water.

PRODUCT RESOURCES

WRITE A REVIEW

REVIEWS (0)